Installation guide

Dial Plan Configuration – SIP Endpoints
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 30
Figure 5: Example solution for dial plan configuration
As shown in the figure above, the Lync Front End Server needs a Trusted SIP Trunk to the
Acano solution, configured to route calls originating from Lync clients through to Acano
coSpaces, Acano client users (native and WebRTC) and also SIP video endpoints. The
subdomains vc.example.com and acano.example.com should be routed through this trunk from
the Lync Front End Server to the Acano solution.
The SIP Call Control platform needs a SIP trunk set up to route calls to the mycompany.com
domain (for Lync Clients) and acano.example.com (for coSpaces and Acano clients) to the
Acano solution.
The Acano solution requires a dial plan to route calls to example.com to the Lync Front End
Server and vc.example.com to the SIP Call Control platform.
The configuration required for the total solution is built up step-by-step below and therefore, to
plan your own installation, work through the steps in the order provided adapting the example as
appropriate.