Installation guide

Prerequisites and Deployment Overview
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 15
 For each virtualized server set up the network interfaces− and on the Core virtualized
server to be able to access the Web Admin Interface.
2. Complete the following using the steps in this Deployment Guide:
 Set up the Syslog server connection on both servers/virtualized servers using the MMP
commands as per the instructions in this Deployment Guide.
We suggest using the same Syslog server for both servers.
 Set up the NTP server connection on both servers/virtualized servers using the MMP
commands as per the instructions in this Deployment Guide.
 On the Edge server/virtualized server, follow the sections in this guide for the XMPP
server, TURN server, and Web Bridge certificates and configuration
 On the Core server/virtualized server only, follow the Call Bridge certificate and
configuration sections in this guide
 Then on the Core server/virtualized server only, complete the Web Admin Interface
configuration as described in this guide – with the following differences:
i. In Configuration > General the considerations are identical in one- and two-
server/virtualized server deployments except:
 The Server Address fields for the TURN and XMPP servers, so that the Call
Bridge knows how to access them. Therefore, instead of “localhost” and the
internal server IP address use the IP address of the Edge server/virtualized
server. Other settings for the TURN and XMPP servers are the same.
 The Web Bridge configuration must point to the Edge server/virtualized server
ii. There are no special considerations in the other Web Admin Interface Configuration
pages
 On the Core server/virtualized server only, set up the LDAP configuration and dial plan
and Call forwarding rules following the instructions in this Deployment Guide
Notes on troubleshooting a two-server/virtualized server deployment:
 On the Core server/virtualized server Status > General page, the XMPP Connection field
tells you whether the connection from the Call Bridge to the XMPP server is up and how
long since it last restarted
 When using a Syslog server for troubleshooting, remember to look in the logs for both
Acano Servers/virtualized servers