Installation guide

Prerequisites and Deployment Overview
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 14
Figure 3: Example two-server Acano solution deployment
Note: The following ports must be open between the Core and Edge components:
 Port 5223 from Call Bridge to XMPP server (for XMPP component)
 UDP Port 3478 from Call Bridge to TURN server (for TURN)
 UDP Port 50000-51000 from Call Bridge to TURN server (for media)
 TCP Port 443 (HTTPS) from Call Bridge to Web Bridge (for guest login)
These ports are required even on a single Acano server/virtualized server deployment –
see Appendix B for a full list of required ports.
The outline deployment procedure for a two-server deployment is:
1. Follow the appropriate Installation Guide:
 For each Acano Server in turn carry out the physical installation, and set up the network
interfaces− and on the Core server to be able to access the Web Admin Interface.