Installation guide

Prerequisites and Deployment Overview
Acano solution: Deployment Guide R1.2 76-1006-06-K
Page 10
Note that both the Edge and Core software can reside in the same physical or separate Acano
Server, on the same or separate virtualized servers. Equally, the Edge software can be on a
physical Acano Server and the Core software on a virtualized deployment (or vice versa).
However, these are just suggested deployments. The Call Bridge, XMPP Server, TURN Server
and Web Bridge can be considered as separate applications that work together to form the
Acano solution and you can choose to run them on whatever server you wish or even run each
application on its own server. You just need to ensure that however you deploy the solution
components they are able to communicate with each other - Appendix B details the ports they
use.
Figure 1: Example Acano solution using Acano Servers
2.2.5 Voice call control
The Acano Server must be connected to a Voice Call Control device and this device must be
attached to a PBX; it is not possible to connect an Acano Server directly to a PBX.
Note: Appendix G describes setting up the SIP Trunk to a Cisco Unified Communications
Manager (CUCM); while Appendix H has equivalent information for the Avaya CM. Use these