Installation guide

Introduction
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 5
1 Introduction
Note: This version of the Deployment guide has a number of sections related to certificates
removed and therefore has been slightly reorganized. The information is now in a new
Certificates Guidelines document for the single combined solution. See section 1.1.
This guide covers the Acano solution deployed as a single combined server deployment (see
the figure below). This deployment has no scalability or resilience.
The server can be an Acano X3 or X2 server, or be hosted on a virtual host (VM); the term
“Acano server” in this document covers both.
Figure 1: Single combined server Acano solution deployment
1.1 How to Use this Guide
This guide follows on from the appropriate Installation Guide (see the figure below)—and
assumes that you have completed the instructions there already.
Between versions 76-1054-01-C and 76-1054-01-D information on certificates has been
removed from this guide and moved to a new Certificate Guidelines document for the single
combined solution. For example, the previous appendix C and D have been moved to the new
guide and within the body of this document, sections about certificates have been reduced to a
single step with a reference to the new document. In addition the guide has been restructured so
that all configuration information relating to each component (for example Web Bridge) has been
consolidated. This provides one place for all certificate information, another for the configuration
relating to each component and reduces duplication.
This deployment guide is intended to be read and acted upon in the order provided. In addition
to this guide and the associated Certificate Guidelines, other reference material shown in the
figure below can be found at the Acano Documentation & software page. If you need any
technical assistance with the configuration, or you want to report a suspected bug, email
[e-mail].