Manualshelf

Installation guide

ManualsBrandsAcano ManualsComputer equipmentSolution
41424344454647484950
Web Admin Interface Settings for the TURN Server
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 49
9 Web Admin Interface Settings for the TURN
Server
This section explains how to configure the settings through which the Call Bridge communicates
with the TURN server. The TURN server allows you to use the built-in firewall traversal
technology when traversing a firewall or NAT.
Follow the instructions below in the order provided at any time after the initial Acano solution
configuration has been completed.
9.1 Network Topology
Figure 15: Example network topology showing TURN Server
9.2 TURN Server Settings
Follow the steps in order.
1. Ensure that you have configured the TURN server.
2. Log in to the Web Admin Interface and configure the Acano solution as follows: