Manualshelf

Installation guide

ManualsBrandsAcano ManualsComputer equipmentSolution
41424344454647484950
Web Admin Interface Settings for the Web Bridge
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 47
Figure 14: WebRTC Client port usage
Note: * Although the port range between the TURN server and the External clients is shown as
32768-65535, currently only 50000-51000 is used. The required range is likely to be larger in
future releases.
8.2 Web Bridge Settings
Follow the steps in order.
1. Ensure that you have installed the Web Bridge certificate and license.
2. Ensure that you have configured the Web Bridge.
3. Sign in to the Web Admin Interface and configure the Acano solution as follows:
Go to Configuration > General.
Set the following where:
Guest Account Client URI = The URI including https:// to reach the guest account;
for example, https://join.example.com
Guest Account JID Domain = guest account JID, e.g. example.com
4. Open a web browser and go to https://join.example.com to test the configuration.