Installation guide

Web Admin Interface Settings for XMPP
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 43
7 Web Admin Interface Settings for XMPP
This section explains how to configure the settings through which the Call Bridge communicates
with XMPP server.
Note: If you are not using the Acano clients including the WebRTC Client, skip this section.
7.1 Network Topology
The following diagram shows a possible network topology and is used for the examples in this
section.
Figure 12: Example network topology showing XMPP server
7.2 XMPP Settings
1. Ensure that you have installed a security certificate for the XMPP server.
2. Ensure that you have configured the XMPP server.
3. If you are using a virtual host, ensure that you have uploaded the license key file.