Installation guide

Prerequisites and Deployment Overview
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 13
Lync 2010 and 2013 clients can share content. The Acano solution transcodes the content from
native Lync RDP into the video format used by the other participants in the meeting and sends
the content in a separate stream. Lync clients receive content from the meeting in the main
video.
The Lync FE Server needs a Trusted SIP Trunk configured to route calls originating from Lync
endpoints through to the SIP video endpoints i.e. to route calls with destination in the SIP video
endpoint domain through to the Call Bridge.
The SIP Call Control requires configuration changes to route calls destined to the Lync client
domain to the Call Bridge so that SIP video endpoints can call Lync clients.
The dial plan routes Lync calls between these two domains in both directions.
The Acano solution includes support for Lync Edge to enable Lync clients outside of your firewall
to join coSpaces.
2.2.3 Deploying Acano clients
If you are using any of the Acano clients you need to enable the XMPP server, refer to the
sections on XMPP Server configuration and Web Admin Interface settings for XMPP. If you are
not using the Acano PC Client, iOS Client for iPhone and iPad, Mac or WebRTC Client,
disregard all sections referring to the XMPP server.
The following diagram shows example control and media flows during an Acano client call.