Installation guide

Prerequisites and Deployment Overview
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 12
2.2 Deployment Overview
This section outlines the steps required to deploy the Acano server (in addition to the
prerequisites from the previous section). See the diagram below.
Figure 3: Example Acano solution using an Acano X series server
2.2.1 SIP trunks and routing
SIP trunks need to be set up to the Acano solution from one or more of the following: SIP Call
Control, Voice Call Control and Lync Front End (FE) server. Changes to the call routing
configuration on these devices are required to route calls to the Acano solution that require the
XMPP service or Web Bridge service for interoperability.
2.2.2 Support for Lync clients
You can use both Lync 2010 and 2013 clients connected to a Lync 2010 or 2013 server.
The Acano solution uses:
 the RTV codec transcoding up to 1080p with the 2010 Lync Windows client and 2011 Lync
Mac clients
 the RTV codec and H.264 with the 2013 Lync Windows client