Installation guide

Prerequisites and Deployment Overview
Acano solution: Single combined Acano server Deployment Guide R1.6 76-1054-01-H
Page 11
cables to a power supply socket to implement power supply redundancy (or even to
separate power supplies), but the server will work with just a single power unit connected
 2U of rack space if using the rack mounting kit provided; 3U of rack space if installing on a
shelf
 A minimum of two Ethernet links:
 One for the MMP (labeled Admin on the back of Acano X series servers). The speed
can be 100M or 1G
 One for a media interface (there are four labeled A to D). The speed can be 1G or10G
IP addresses can be configured statically or automatically via DHCP or SLAAC/DHCPv6.
Ethernet links will operate at the speed of the network switch; the switch port should be set
to auto-negotiate speed. If you are using a speed of 10G be sure to use the appropriate
cable.
See the Acano solution X series Server Installation Guide for full details.
2.1.10 Virtualized deployment-specific prerequisites
 A qualified host server with some specific resources. See the Acano solution Virtualized
Deployment Installation Guide for full details
 XMPP license file. If you have not already done so, contact [e-mail] providing
one of the MAC addresses of the interfaces assigned to the VM to obtain an XMPP license