Technical Specifications

Overview
These CCX plywood panels are produced for pressure treating and carry the V611 stamp ensuring no hardwood
is used in the panel(hardwood is not treatable). The panel is manufactured with c-grade veneer construction all
the way through to give a full Exterior grade. Manufactured to the product standard PS1-09. These panels are
then treated against rot and decay for use with ground contact.
Specifications
- Lengths: 8', 9’, 10’ - Widths: 4', 5’ - Thickness: 3/8'', through 1-1/8'' - Grades: APA or defined by end user. -
Face Veneer: Pine or Fir C - Core Veneer: C grade - Back Veneer: C grade. Adhesive: NAUF exterior, fully
water resistant phenolic glue
Key Advantages
- NAUF (No added Urea Formaldhyde) - Custom grade, thickness,& dimensions available - Special finishes
available - Produced to customer specifications - May contribute to LEED credits
Certifications
APA - Manufactured to meet or exceed APA - The Engineered Wood Association performance standards PS 1-
09 - Meets PS 1-09 and V611 standards for: Veneer grades, glue and bond durability, thickness requirements,
testing procedures, finished plywood tolerances, identification and stamping guidelines.