Manualshelf

Service manual

ManualsBrandsAC Tool Supply ManualsAir CompressorTA-3EA
71727374757677787980
Service Manual Specifications 67
Identification label and serial numbering system
The identification label for the Spot Vital Signs is located on the bottom of the device. The
serial number format has 9-digits. The first 4 numbers state the year of manufacture and
the last 5 numbers state the Spot Vital Signs manufacturing number. Therefore,
200608000 means the 8000th Spot Vital Signs manufactured in the year 2006.
For Spot Vital Signs, Version 1, the serial number is any year prior to 2007 and a
manufacturing number 04999 or less. These serial number labels require the CE0050
mark.
For Spot Vital Signs, Version 2, the year is 2007 and the manufacture number is 05000.
These serial number labels require the CE0297 mark.
Firmware identification
To confirm the software levels of the Spot vital signs, enter the Configuration Mode (page
20).
The main software versions display as follows:
In the SW1 screen the top two numbers are the software version of the Spot Module and
the remaining numbers are for the SpO
2
module (if available). Press the Start or Clear
button to cycle through the SpO
2
software number.
In the SW2 screen the two numbers represent the NIBP module software and the
temperature algorithm version (if temperature is active).
CERTIFIED TO
CAN/CSA STD
C22.2 NO. 601.1
CONFORMS TO
IEC 60601-1
UL STD 2601-1
4341 State Street Road
Skaneateles Falls,
NY 13153 USA
MADE IN THE U.S.A.
+
PATENT NO.
D392,043
420 SERIES
0050
N344
WELCH ALLYN PTY LTD
5/38-46 SOUTH STREET
RYDALMERE
NSW 2116
AUSTRALIA
US
74 22 7
L
I
S
T
E
D
L
I
S
T
E
D
C
9-digit serial number
location.
SPOT VITAL SIGNS
Patent No. D392,043
4341 State Street Road
Skaneateles Falls,
N 13153 USA
MADE IN THE U.S.A.
+
Pb
0297
N344
WELCH ALL N PT LTD
5/38-46 SOUTH STREET
R DALMERE
NSW 2116
AUSTRALIA
CERTIFIED TO
CAN/CSA STD
C22.2 NO. 601.1
CONFORMS TO
IEC 60601-1
UL 60601-1
www.
welchallyn.
com
C
US
166292
9-digit model and serial
number location.
Note
Review the Repair Test Specifications document located in Appendix C to verify
the firmware levels.