Instructions / Assembly

Nation Wide Products www.ac-safe.com Patent # US 9,605,870 B2

D29/557,374

9,447,916 B2

US. D782,289S

NTN 1 Instructions

Thank you for your purchase of the No Tools Required ac support bracket.

IT IS NOT RECOMMENDED FOR USE IN HORIZONTAL SLIDING WINDOWS.

This bracket is designed to be installed in single and double hung windows.

Assembly instructions:

Overview:

There are 5 main parts that make

up the support bracket:

A - Interior Crossbar

B - Extending Body

C -Extending Leg

D - Load Bar

Hardware Kit

LET’S GET STARTED.

PAGE 1
NTN 1 Instructions Thank you for your purchase of the No Tools Required ac support bracket. IT IS NOT RECOMMENDED FOR USE IN HORIZONTAL SLIDING WINDOWS. This bracket is designed to be installed in single and double hung windows. Assembly instructions: Overview: There are 5 main parts that make up the support bracket: A - Interior Crossbar B - Extending Body C -Extending Leg D - Load Bar Hardware Kit LET’S GET STARTED. Nation Wide Products www.ac-safe.
PAGE 2
1. Measure the width of your window. Write this number down you will need it. Now get the interior crossbar (A). On the interior 2. crossbar Now getthere the extending (B) and extending (C). are 2 armsbody on each side.theDepress the leg white Insideon thethe hardware youthe willlock findbars a stainless-steel ring pin. button top andkit slide out of the interior Align theOnce hole at end of are the out leg up center of crossbar. thethe lock bars youwith can the adjust eachhole arm. the extending body.
PAGE 3
6. Now place the support bracket in the window. Push the leg out so it will rest snuggly against the exterior of the house. The interior crossbar should be against the wall, framing, or the window trim. DO NOT REST AGAINST THE WINDOW FRAME 7. Level the support bracket using the level placed on top of the extending body. 8. Be sure to check the support bracket is installed correctly prior to placing the window unit. This can easily be done by applying force on the load bar.