Use and Care Manual

39
OTHER SETTINGS
JUMP TO OFF MODE
Holding the mode button for 3 seconds while in any mode or
setting will automatically jump to OFF Mode. This function is
disabled if the controller is locked.
FACTORY RESET
Holding the mode, up, and down buttons together for 5 sec-
onds will reset your controller and restore factory settings. This
clears all user parameters in each controller mode and setting.
CONTROLLER LOCK
Holding the setting button will lock the controller in your cur-
rent mode. While your controller is locked, no parameters may
be adjusted, nor will you be able to switch modes. Holding the
power button again will unlock the controller.
HOLD +
HIDE SCREEN
Lock the controller so no settings can be adjusted. See above.
Then press the setting button to turn the display off. Pressing
it again will turn the display back on. Programs will still run in
the background while the LCD screen is off.
PRESS +
RESET TO OFF OR ZERO (0)
Holding the up and down buttons together for 2 seconds will
reset the value of your current mode to OFF or 0. Pressing
either the up or down button will return the value to the
mode’s last setting.
HOLD +
HOLD +
AUTO INCREASING OR DECREASING
Holding the up or down button will increase or decrease the
user setting automatically until you release them.
HOLD +
HOLD +
HOLD +