Instructions / Assembly

ManualsBrandsAC Infinity ManualsGarden CenterCloudline S12 Quiet 12 in. Inline Duct Fan Speed Controller Heating Cooling Booster Hydroponics Grow Tents Ventilation

53

PROGRAMMING

T-SERIES

CALIBRATION TEMPERATURE SETTING

Adjusts the temperature reading the sensor

probe is measuring. Press the up or down button

to increase or decrease the data figure in 1°

increments. The calibration cycle ranges from

-20°F to 20°F (or -10°C to 10°C) and will be

applied to the sensor probe’s measurements.

CALIBRATION HUMIDITY SETTING

Adjusts the relative humidity reading the sensor

probe is measuring. Press the up or down button

to increase or decrease the data figure in 1%

increments. The calibration cycle ranges from

-10% to 10% and will be applied to the sensor

probe’s measurements.

CALIBRATION LEAF OFFSET SETTING

Adjusts the VPD reading the sensor probe

is measuring. Press the up or down button

to increase or decrease the data figure in 1°

increments. The calibration cycle ranges from

-20°F to 20°F (or -10°C to 10°C) and will be

applied to the sensor probe’s measurements.