Datasheet

PoE Injector

Art. no. TVAC25000

•

For transmitting power and data via network cable to all PoE capable network cameras

•

Transmission range up to 100 m

•

Meets IEEE 802.3af standard

Minimise the need for cables when installing IP cameras. Using the Power over Ethernet (PoE) injector, the data

and IP camera power supply are fed into an Ethernet line. Power is then supplied exclusively via the network

cable - a separate power line is no longer necessary. Additionally, you are no longer reliant on an available

power supply (socket etc.) when selecting the camera location.

Technical Data:

Dimensions (W x H x D) 86 x 36 x 76

Connection type 2x RJ-45 (EIA 568A and EIA

568B)

Output 1xRJ-45 (PoE, data &

voltage)

Output power 15,4 W

Output voltage AC 48 V DC

Width 86 mm

Data output 10/100 MB/s

Input voltage AC 100 − 260 VAC (47 - 63 Hz)

Input current 0,4 A @ 110VAC / 0,2 A @

220 VAC

Height 36 mm

Length 76 mm

Max. operating

temperature

50 °C

Max. humidity 90 %

Min. operating

temperature

0 °C

Net weight 0,15 kg

Certifications CE

Page 1 of 1

PAGE 1
Powered by TCPDF (www.tcpdf.org) PoE Injector Art. no. TVAC25000 Page 1 of 1 • For transmitting power and data via network cable to all PoE capable network cameras • Transmission range up to 100 m • Meets IEEE 802.3af standard Minimise the need for cables when installing IP cameras. Using the Power over Ethernet (PoE) injector, the data and IP camera power supply are fed into an Ethernet line. Power is then supplied exclusively via the network cable - a separate power line is no longer necessary.