Instructions
32
Explanation of Z-Wave specific terms
Controller is a Z-Wave device with capabilities to manage the network.
Controllers are typically Gateways,Remote Controls or battery operated wall
controllers.
Slave is a Z-Wave device without capabilities to manage the network. Slaves
can be sensors, actuators and even remote controls.
Primary Controller is the central organizer of the network. It must be a
controller. There can be only one primary controller in a Z-Wave network.
Inclusion is the process of adding new Z-Wave devices into a network.
Exclusion is the process of removing Z-Wave devices from the network.
Association is a control relationship between a controlling device and a
controlled device.
Wakeup Notification is a special wireless message issued by a Z-Wave device to
announces that is able to communicate.
Node Information Frame is a special wireless message issued by a Z-Wave
device to announce its capabilities and functions.
Tecnical Data
mm
Weight 260 gr
IP Class IP 20
Battery type 4 * AA
Device type Door lock
Sleeping
Slave
Firmware Version 1.0
Z-Wave Version 06.01
Z-Wave Product Id 0154.0005.
0002
Operating tempera- 0°C to
ture range +40°C
transmission power
Supported Command Classes
(S2 Access Only)
251 Travel
cycles
latch
Coun-
ter
0 -
16,7
Mio.
16,7 Mio. 3 Counter, how
actuated
252 Travel
cycles
unlocked
Coun-
ter
0 -
16,7
Mio.
16,7 Mio. 3 Counter, how
„Unlocked“
direction
253 Travel
cycles
locked
Coun-
ter
0 -
16,7
Mio.
16,7 Mio. 3 Counter, how
direction
254 ABUS
version
Ver-
sion
0 -
65535
- 2 Display ABUS
-
on, e.g. 1.05
CFA3010 Z-Wave6.indd 32 09.01.2019 16:19:50