Safety data sheet

ABUS Test-Spray RM
Safety Data Sheet
Product code: 11ACH20057A0125
Print date: 20.06.2014 Page 6 of 13
ABUS August Bremicker Söhne KG
according to Regulation (EC) No 1907/2006
function of the specific working place concentration and quantity of hazardous substances. For special
purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned
above together with the supplier of these gloves.
Flame-retardant protective clothing. Wear anti-static footwear and clothing
Skin protection
In case of inadequate ventilation wear respiratory protection.
Respiratory protection
colourless
Aerosol
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
solvent like
Odour:
Test method
pH-Value (at 20 °C):
not determined DIN 19268
Changes in the physical state
not determined
Melting point:
-40 °C
Initial boiling point and boiling range:
No information available.
Sublimation point:
No information available.
Softening point:
No information available.
:
-80 °CFlash point:
Flammability
not applicable
Solid:
not applicable
Gas:
1 vol. %Lower explosion limits:
11 vol. %Upper explosion limits:
No information available.
Ignition temperature:
Auto-ignition temperature
not applicable
Solid:
not applicable
Gas:
Decomposition temperature:
not determined
Not oxidizing.
Oxidizing properties
not determined
Vapour pressure:
No information available.
Vapour pressure:
Density (at 20 °C): 0,7 g/cm³
DIN 51757
Bulk density:
No information available.
Water solubility:
insoluble
Solubility in other solvents
not determined
not determined
Partition coefficient:
No information available.
Viscosity / dynamic:
Viscosity / kinematic:
No information available.
No information available.
Flow time:
Revision No: 1,00 Revision date: 05.06.2014 GB - EN