Specifications

Device Introduction
IM/265/7/9/ADD/FF-EN_01 Connection to FOUNDATION Fieldbus 7
- LAS Functionality
With this functionality the models 265 / 267 / 269 FF can acts as backup master, keeping
alive the Function block application whenever the Master/Controller fails.
The LAS implemented in the device supports 1 sub-schedule, 25 sequences and
25 elements for sequence.
- 1 Enhanced Resource Block
This block identifies the transmitter and includes characteristics of the instrument connected
at the Fieldbus like Model, Serial Number, Manufacturer and so on. Only 1 Resource Block
can be present in each device.
- 1 … 3 Standard Analog Input Function Block
These blocks are for the Out Values and Status of Pressure or Differential Pressure, Static
Pressure with Differential Pressure transmitters and Process Temperature for Multi Variable
Transmitters.
- Standard Proportional Integral Derivative Function Block
Inside the Function blocks (AI, PID) are contained the information/parameters relating the
Process Control. Each Function Block type provides specific functionality. The combination
of different Function Blocks offers the possibility to design a complete control loop.
- 1 Multi Variable Function Block (only with 267 / 269)
The Multi Variable Function blocks are contained the parameters relating to the flow
calculation.
- 1 Custom Pressure with Calibration Transducer Block
In this block are contained the information relating the models 265 / 267 / 269 sensor like
Model, Calibration, Physical Limits or Construction, and setting about how to convert the
measured Pressure to Flow, Level or Volume measurement.
- 1 Custom Temperature with Calibration Transducer Block (only with 267 / 269)
In this block are contained the information relating the models 267 / 269 external Pt100
sensor.