Specifications

Device Configuration
IM/265/7/9/ADD/FF-EN_01 Connection to FOUNDATION Fieldbus 63
Idx Name Byte PC Description
36 OUT_MASS_FLOW_
MAX
4 R Maximum mass flow / Normalized volume flow. Maximum value
of the Mass flow / Normalized volume flow. This value will be
used to set the physical zero shift point.
It represents the 100 % point.
37 OUT_VOL_FLOW_MAX Maximum value of the volume flow.
38 ERROR_HANDLE_DP 1 R/W BAD dP input handling. Selection of possibilities how the
multivariable function block shall react if a needed input value is
invalid (Status BAD-...).
39 ERROR_HANDLE_P 1 R/W BAD P input handling. Selection of possibilities how the
multivariable function block shall react if a needed input value is
invalid (Status BAD-...).
40 ERROR_HANDLE_T 1 R/W BAD T input handling. Selection of possibilities how the
multivariable function block shall react if a needed input value is
invalid (Status BAD-...).
41 MV_RESERVED_1 4 R Only for use with DMA.
… … … R Only for use with DMA.
106 MV_RESERVED_66 32 R Only for use with DMA.