Specifications

Device Configuration
62 Connection to FOUNDATION Fieldbus IM/265/7/9/ADD/FF-EN_01
Idx Name Byte PC Description
The block alarm is used for all configuration, hardware,
connection failure or system problems in the block. The cause
of the alert is entered in the subcode field. The first alert to
become active will set the Active Status in the status
parameter. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported without
clearing the Active Status, if the subcode has changed.
1 R/W Unacknowledged
1 R Alarm State
8 R Time Stamp:
The date and time of when the alert was generated.
2 R Subcode: Cause of the alert
28 BLOCK_ALM
2 R Value:
The value generating the alert.
The alert status associated to the function block.
2 Current
2 R Unacknowledged
2 R Unreported
29 ALARM_SUM
2 R Disabled
30 DIFF_PRESSURE_
HI_LIM
4 R Differential pressure range high limit. Upper working range limit
of the differential pressure.
31 DIFF_PRESSURE_
LO_LIM
4 R Differential pressure range low limit.
Lower working range limit of the differential pressure.
32 PRESSURE_HI_LIM 4 R Pressure range high limit.
Upper working range limit of the pressure.
33 PRESSURE_LO_LIM 4 R Pressure range low limit.
Lower working range limit of the pressure.
34 TEMPERATURE_
HI_LIM
4 R Temperature range high limit.
Upper working range limit of the temperature.
35 TEMPERATURE_
LO_LIM
4 R Temperature range low limit.
Lower working range limit of the temperature.