Specifications

Device Configuration
IM/265/7/9/ADD/FF-EN_01 Connection to FOUNDATION Fieldbus 53
Idx Name Byte PC Description
The summary alarm is used for all process alarm in the block.
The cause of the alert is entered in the subcode field. The first
alert to become active will set the Active Status in the status
parameter. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported
without clearing the Active Status, if the subcode has changed.
1 R/W Current
1 R Unacknowledged
8 R Unreported
45 ALARM_SUM
2 R Disabled
46 ACK_OPTION 2 R/W Used to set auto acknowledgment of the alarms.
47 ALARM_HYS 4 R/W Amount the PV must return within the alarm limit before the
alarm condition clears.
Alarm Hysteresis is expressed as percent of the OUT_SCALE
span.
48 HI_HI_PRI 1 R/W Priority of HI_HI_ALM
49 HI_HI_LIM 4 R/W The setting of the High High Limit producing the High High
Alarm.
This value is expressed in OUT_SCALE Unit Code.
50 HI_PRI 1 R/W Priority of HI_ALM
51 HI_LIM 4 R/W The setting of the High Limit producing the High Alarm.
This value is expressed in OUT_SCALE Unit Code.
52 LO_PRI 1 R/W Priority of LO_ALM
53 LO_LIM 4 R/W The setting of the Low Limit producing the Low Alarm.
This value is expressed in OUT_SCALE Unit Code.
54 LO_LO_PRI 1 R/W Priority of LO_LO_ALM
55 LO_LO_LIM 4 R/W The setting of the Low Low Limit producing the Low Low
Alarm.
This value is expressed in OUT_SCALE Unit Code.
56 DV_HI_PRI 1 R/W The Priority of DV_HI_ALM
57 DV_HI_LIM 4 R/W The setting of the Deviation High Limit producing the Deviation
High Alarm.
This value is expressed in OUT_SCALE Unit Code.