Specifications

Device Configuration
IM/265/7/9/ADD/FF-EN_01 Connection to FOUNDATION Fieldbus 35
Idx Name Byte PC Description
Code for Volume
1034 cubic meters
1035 cubic decimeters
1036 cubic centimeters
1037 cubic millimeters
1038 liters
1039 centiliters
1040 milliliters
1041 hectoliters
1042 cubic inch
1043 cubic feet
1034 cubic yard
1035 cubic mile
1036 pint
1037 quart’
1038 gallons
1039 imp.gallons
1040 bushel
1041 barrel
1042 barrel liq.
1043 Standard cubic foot
4 R/W High Range
4 R/W Low Range
2 R/W Unit Index
11 OUT_SCALE
1 R/W Decimal Point
All the values are associated with the OUT.
All the units´ code specified by the FF is
available for this Scaling.
Refer to the FF specs (Ref. 2) for the
complete set of available unit code
1 R/W Grant 12 GRANT_DENY
1 R/W Deny
13 IO_OPTS 2 R/W Option which the user can select to alter Input and Output
block processing. Only the Low cut-off can be enabled /
disabled
14 STATUS_OPTS 2 R/W Option which the user can select block processing of status.
The available selections are:
- Propagate Fault Forward
- Uncertain if Limited
- BAD if Limited
- Uncertain if MAN Mode
15 CHANNEL 2 R/W The CHANNEL value is used to select the measurement value
from the I/O block. Refer to the TABLE B of this Manual for
understand how the CHANNEL can be selected.
16 L_TYPE 1 R/W Linearization Type. The selectable types are:
- Direct
- Indirect
- Indirect Square Root