Specifications

Device Configuration
28 Connection to FOUNDATION Fieldbus IM/265/7/9/ADD/FF-EN_01
Idx Name Byte PC Description
26 SHED_RCAS 4 R/W Time duration at which to give up on computer writes to
function block Rcas locations. Shed from Rcas shall never
happen when Shed_Rcas = 0.
27 SHED_ROUT 4 R/W Time duration at which to give up on computer writes to
function block Rout locations. Shed from Rout shall never
happen when Shed_Rout = 0.
28 FAULT_STATE ! R Fault State
29 SET_FSTATE 1 R/W Set Fault State
30 CLR_FSTATE 1 R/W Clear Fault State
31 MAX_NOTIFY 1 R Maximum number of unconfirmed alert notify messages
possible.
32 LIM_NOTIFY 1 R/W Maximum number of unconfirmed alert notify messages
allowed.
33 CONFIRM_TIME 4 R/W The minimum time between retries of alert report. Retries shall
not happen when Confirm_Time = 0.
34 WRITE_LOCK 1 R/W If set, no writes from anywhere are allowed except to clear
Write_Lock. Block inputs will continue to be updated.
This alert is generated by any change to the static data.
1 R/W Unacknowledged:
1 R Update State:
8 R Time Stamp: The date and time of when the alert was
generated.
2 R Static Revision: The number of the last increment generating
the alert.
35 UPDATE_EVT
2
R Relative Index: The index of the changed variable generating
the alert.
The block alarm is used for all configuration, hardware,
connection failure or system problems in the block. The cause
of the alert is entered in the subcode field. The first alert to
become active will set the Active Status in the status
parameter. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported
without clearing the Active Status, if the subcode has changed:
1 R/W Unacknowledged:
1 R Alarm State
8 R Time Stamp: The date and time of when the alert was
generated.
2 R Subcode: Cause of the alert
36 BLOCK_ALM
1 R Value: The value generating the alert.