Specifications

Hardware Characteristics
16 Connection to FOUNDATION Fieldbus IM/265/7/9/ADD/FF-EN_01
Main menu Submenu
(other parameters / explanations)
DISPLAY Output signal in physical unit
(265Dx: Current measured value for differential pressure, or measured value derived from
this, such as flowrate / level and / or:
265Gx:Current measured value of the gauge pressure or measured value derived from
this such as level and / or:
265VS, 265Ax: Current measured value of the absolute pressure and / or:
267JS / Cx, 269JS / Cx: Current measured value of the differential pressure,
In eachcase with user-specific unit.
Corresponds to the "OUT" variable in case of PROFIBUS PA or FF 1 .
Percent value of output signal 2 .
Mass flow / standard volume flow (only for 267Cx, 269Cx) 4 .
Operating volume flow (only for 267Cx, 269Cx) 5 .
UNIT
(only for 265xx)
p/dp (select units for display code No. 8)
OUT (only for 265xx)
“Selection list” with units (for the output variable, e. g.: kg/h, m [for display code No. 1])
FUNCTION
(only for 265xx)
Linear (linear characteristic )
Square root (square root characteristic √)
Custom (Activation / Deactivation of a freely programmable characteristic )
Units of the parameter „UNIT -> p/dp“
- Pa
- GPa
- MPa
- KPa
- mPa
- uPa
- HPa
- bar
- mbar
- Torr
- Atm
- psi
- g/cm
2
- kg/cm
2
- in H
2
O
- mm H
2
O
- ft H
2
O
- in Hg
- mm Hg