Manualshelf

User manual

ManualsBrandsAbus ManualsComputer equipmentCASA20550
51525354555657585960
58
English
3. Camera description
3.1 Front view/Rear view
Voltage supply: Connection for 12 V PSU
LAN RJ-45 jack: The network interface is protected by a waterproof cover. For the initial setup of the camera
unscrew the cover and connect the camera with a network cable. After finishing the initial setup,
screw the cover properly.
Reset button: The reset button is located behind a waterproof screw cover. In order to access the reset
button, unscrew the cover. Make sure to install the cover again after you have activated the reset button
with a suitable object.
Push the reset button once Camera will be restarted
Push the reset button for 10 seconds The camera will be reset to default settings
WLAN connector: Used to establish a wireless network connection WLAN 802.11 b/g/n