Instruction Manual

75
Select the View Log specified by your SMS service centre. This can
be either TAP or UCP.
• SMS TEL. Number
Some service centres require the calling number before they accept a
processing request for an SMS. This is also used for the clear
charging of SMS messages. Enter the phone number of the analogue
line here.
Examples:
- Germany/T-Com: Select the View Log UCP8N1 (service
centre 0193010)
- Germany/Anny Way: Select the View Log UCP8N1 (service
centre 09003266900)
- Austria: Select the View Log TAP7E1 (service centre
0900664914)
- Denmark: Select the View Log UCP8N1 (service centre
9011201)
- Switzerland: Select the View Log UCP8N1 (service centre
0794998990)
8.3.3.4 Display
• Flash On Message
- When this function is activated (ON), the GSM dialer display
flashes on and off when a reminder message is waiting
(default). Playing the reminder message stops the flashing.
- When the function is deactivated (OFF), the GSM dialer
does not flash.
• Beep On Message
- When this function is activated (ON), the GSM dialer beeps
each minute when a reminder message is waiting. Playing
the reminder message stops the beeping.
- When the function is deactivated (OFF), the GSM dialer
does not flash (default).
• Temperature
- When this function is activated (ON), the display shows the
current temperature (default).
- No temperature is displayed when this function is
deactivated (OFF).
• Line Fault