User guide

13. Technical data

Security level: 2 EN 50131-1 and -3 :2007-04

Environment class: II, EN50131-1 or EN50130-5

Operating temperature: -10 °C to +55 °C, EN50130-5 Clause 8 (+55 °C) and

Clause 10 (-10 °C), with average relative humidity 75%, non-condensing

Power supply: 10-14 V DC, 12 V DC nominal, device protected by pole protection diode

Power consumption: max. 300 mA

Emergency power supply: None

Number of channels: 8 device channels

8 PIN/proximity chip key channels

Display: 10 LEDs, visible from the outside when housing is closed.

8 blue LEDs for channels and programming

1 red LED for faults

1 green LED to display the power supply

Outputs: 6 semi-conductor relays with potential-free contacts (can be set to NO or NC) for

Tamper

Panic

Activation command

Internal activation command

Low battery

Supervision or Jamming

Maximum switching power

U DC max = 48 V DC

I DC max = 500 mA

U AC max = 30 V AC rms

I AC max = 350 mA rms

Forward resistance of <=2 Ω

Lock resistance >=50 MΩ (at a maximum creepage of 1 µA at 50 V)

Inputs: 10, voltage-controlled, for

Alarm centre activated

Alarm centre internally activated

Not ready for activation or general fault

Flash

Siren in case of alarm

Setup mode

Siren in case of fire

Input time info beep

Output time info beep

Error during output time info beep