Manual

1. Main features

• 8 programmable zones

• tamper monitoring

• duplex-antenna technology

• simple connection using 4-wire BUS

• compatible to TERXON M / MX

• 868MHz FM security frequency

2. Main features

3. Installation

1. Open the housing of the radio expansion.

2. Release the 3 screws and remove the PCB from the

rear wall of the unit.

3. Use the rear of the radio expansion unit to draw the

boreholes at the required assembly location. Bore the

appropriate holes and insert the correct dowel pins into

then.

4. Insert the cable of the 4-wire BUS through the opening

on the rear of the module.

1 Error LED (Fail)

2 OK LED (Pass)

3 Detector

4 Display

5 Select button

6 Delete button

7 Antenna

8 Tamper switch

9 Radio PCB

10 Learn sensor

11 Supervision jumper

12 Jamming jumper(radio

interference)

13 Addressing jumper

14 BUS Connection

15 Cable Entry