User manual

21
Reduced
Locking is reduced to one-speed (e.g. one-speed even for two-speed
locking and opening of the door). We recommend permanent two-speed
locking.
Automatic, 1x closing.
cancel conrm
Drive power Setting the drive speed. (The “Automatic” setting should be
set permanently.)
Automatic, Maximum.
cancel conrm
g. MENU FACTORY RESET
Change with from NO to YES. 3 seconds conrms. Factory reset is performed. All
settings are deleted. cancel
h.MENU TIME ZONE
Time zone A, time zone B, ... time zone O (total of 15 time zones).
Open the programming of the 1st time zone with . Set the dierent access times.
You can assign these to dierent users under MENU e.
Scroll through the days with . sets the day as active (X) or inactive ( ).
Time from format [hh:mm],
0
-
9
, to format [hh:mm],
0
-
9
.
cancel conrm
i.MENU HISTORY
Shows the events of the drive, e.g. user 1 unlocked.
Note: the last event is shown, with one can switch to the event before the last event.
Maximum of 32 events are shown, whereby the latest overwrites the oldest. The entry
„admin“ is logged in the event log for unlocking without a code or automatically locking.
cancel conrm
j. MENU SETUP
Greeting Assignment of the characters see
5.3
e. Continue to next
character with . Save the name with 3 seconds .
Cancel with .
Signal Conguring the acoustic feedback on, o, low.
Display light time The display light time can be selected with from 2-10 seconds +
aerglow time.
cancel conrm
HomeTec_Pro_Tastatur_160705_V02.indd 21 23.01.17 08:28