User manual

20
f. MENU DRIVE
Door 1, Door 2, Door 3. Note: if you are using multiple drives on dierent doors,
select the required drive.
Overview Driving cycles: shows how many times the latch was pulled, unlocked
or locked. Lock: shows the lock position (locked or unlocked). The
number in the brackets shows the installed soware version number.
Rename
You can assign names when using multiple drives (e.g. front door,
garage etc.). Assignment of the characters see
5.3
e. Continue to next
character with . Save the name with 3 seconds .
Cancel with .
Without code
Lock without code. Note: If the menu option “lock without code” is
selected, you can lock the door simply by pressing
. Inactive,
active.
cancel conrm
Automatic
Automatic locking
Inactive, active.
If this function is enabled, you can set a time from - to,
in which the drive locks automatically. [hh:mm]
0
-
9
Note: In the set time it is regularly (approx. every 15 min.) queried whether
the drive is locked. This feature leads to higher energy consumption.
cancel conrm
Touch control
Operating the drive keys
Active: all drive keys can be operated.
Operating keys: both arrow keys are deactivated on the drive
Inactive: all arrow keys are deactivated on the drive.
cancel conrm
Latch time time for which the latch is stopped when opening the door.
Can be selected with from 1 to 20 seconds.
cancel conrm
Latch power
Medium, Low, High. (Recommendation: for optimal service life of
the drive and key, select the “Medium”/”Low” setting.)
cancel conrm
Signal Setting the acoustic in the drive
Latch: signal only sounds when pulling back the latch
Locked: signal only sounds when locked
Each end position: signal sounds when opened or locked
Inactive: no signal sounds for any position
Start of drive: signal sounds at the start of the opening or locking drive
cancel conrm
HomeTec_Pro_Tastatur_160705_V02.indd 20 23.01.17 08:28