Owner`s manual
34
Below are several different popular display technologies and their most likely native resolutions.
Plasma
42-43” – 852x480, 1024x768, 1024x1024 (ALiS)
50-63” – 1280x768, 1360x768, 1365x768, 1366x768, 1920x1080 (1080p)
DLP
Rear Projection – 1280x720 (720p), 1920x1080 (1080p)
Front Projection – 852x480, 848x600, 1024x768, 1280x720 (720p), 1920x1080 (1080p)
LCD
Rear Projection – 1280x720 (720p), 1366x768
Front Projection – 1024x768, 1280x720 (720p), 1366x768
Direct View – 1024x768, 1280x720 (720p), 1366x768, 1920x1080 (1080p)
LCoS
Rear Projection – 1280x720 (720p), 1366x768, 1920x1080 (1080p)
Front Projection – 1024x768, 1280x720 (720p), 1366x768, 1920x1080 (1080p)
CRT
Rear Projection – 480p, 540p, 1080i
Front Projection – 1280x720 (720p), 1280x960, 1440x960, 1440x1152,
1920x1080 (1080p)
Initial Setup of the iScan to Your Display:
Test Patterns used: Frame Geometry
Checker board
Vertical Lines
Horizontal Lines
Judder
The following information uses a Panasonic 50” commercial plasma as an example.
1 - Select the preset which is closest to the output resolution that you need. In this situation,
the closest preset is 1366x768. There are two 1366x768 presets on the VP50 and in the
case of this display, the ‘1366x768 (2)’ is the proper choice. It is very easy to try both to
see which one is closer to giving you the desired results.
Output Setup
_
Format
_
1366x768 (2)
2 - Display the ‘Frame/Geometry’ test pattern to verify that the image is positioned correctly
on your display.
Conguration
_
Test Patterns
_
Frame Geometry
NOTE: To turn the test patterns on and off, use the Test Pattern On/Off button on your remote
control. You can also navigate backwards and forwards through the test patterns, using the t and u
buttons (on either side of Test Pattern On/Off) respectively.