Owner`s manual
5
• Serial Cable for Software Updates and Automation (1:1)
•
VRS Optimization & Evaluation DVD
• DVDO Software CD
If you are missing any items, please contact your dealer or the DVDO Support Team.
The iScan VP50 uses BNC-style analog connectors and an HDMI digital connector to provide video
output signals. You must purchase a cable or adapters to connect this output to your display. Different
displays have different input connectors, so check your display specications to ensure compatibility.
Both input and output cables can be supplied by your Authorized DVDO Reseller. To nd your nearest
Authorized DVDO Reseller, go to www.dvdo.com/res/index.html. There are also a wide selection
of cables and adapters available on our website at www.dvdo.com/pro/pro_acc.html.
Display Compatibility Requirements
DVDO iScan video processing products are compatible with a wide range of displays. These include
digital TVs, projectors, and at panel displays, as well as other emerging technologies that can
support 480p or higher resolution video signals. To determine if your display is compatible with the
DVDO iScan VP50, look to see if it has one of the digital inputs listed below. If not, then your display
may only have analog High Denition inputs or it is probably limited to receiving a standard NTSC, PAL
or SECAM interlaced signal and will not function correctly with iScan VP50.
Digital Inputs
HDMI input DVI-D input
Analog Inputs
VGA HD-15 input 5 BNC RGBHV inputs
Component input (YPbPr or YCbCr)
Component input that are not capable of accepting a 480p signal should be labeled ‘480i’
(NTSC) or ‘576i’ (PAL/SECAM).