Owner`s manual

26
42 HDMI 2 1080i (ATSC)
43 HDMI 2 VGA
44 HDMI 2 SVGA
45 HDMI 2 XGA
47 HDMI 3 480i (NTSC)
48 HDMI 3 576i (PAL/SECAM)
49 HDMI 3 480p (NTSC)
50 HDMI 3 576p (PAL/SECAM)
51 HDMI 3 720p (ATSC)
52 HDMI 3 1080i (ATSC)
53 HDMI 3 VGA
54 HDMI 3 SVGA
55 HDMI 3 XGA
There is a separate set of settings not just for each input but for each format as well. This provides
a lot of exibility but is complex. For example, you can make settings for an input with an NTSC
source, but when the source is changed to PAL, you must specify new settings.
Each input/format settings contains the information shown in Table 4.
Table 4. Format Settings
Setting Description
Picture Control
Brightness
Contrast
Saturation
Hue
Sharpness
Chroma Error Correction
Audio Select Audio 1 - 4, Analog, HDMI
Audio Delay
Overscan
VCR Mode
Deinterlacing
Input AR Preset Preset 1-10 or User Preset
User Preset User AR
Hor. Zoom Hor. Zoom
Vert. Zoom Vert. Zoom
Hor. Pan Hor. Pan
Vert. Pan Vert. Pan
Hor. Borders Hor. Borders
Vert. Borders Vert. Borders
There is only one set of presets (Preset 1 through Preset 10) for the whole system. However the
User Preset is per input and per format.
Setting up an iScan VP20 Using the Internal Test Patterns and Avia:
Guide to Home Theater Calibration DVD
The iScan VP20 has 13 built-in test patterns to assist in the setup of your display and your individual
sources. ABT recommends that you use the Avia: Guide to Home Theater DVD to assist in this setup.
This DVD can be purchased directly from DVDO at http://www.dvdo.com/companion/avia.php.