Owner`s manual

25
S E C T I O N 5 – A P P E N D I X
Non-Volatile Memory Settings
The iScan VP20 stores a variety of user settings in non-volatile memory. Non-volatile memory
retains its contents when power is lost. There is one group of system settings and one group of user
settings.
System Settings
Table 2. shows System settings.
Table 2. System Settings
Setting Description
Active Input One of many VP20 inputs or Auto Active Input
Auto StandBy Off or On
Video Priority Priority list of inputs when Auto Active Input is on
User Mode Normal or Advanced
Border Level Blank to quarter gray
Test Pattern Generator Current selected test pattern
Serial Port Bit Rate Select an available baud rates.
Input/Format Settings
The iScan VP20 supports an independent set of saved settings based on input and format as shown
in Table 3.
Table 3. Input/Format Settings
Settings Input Format
1 Composite 1 NTSC
2 Composite 2 PAL/SECAM
3 S-Video 1 NTSC
4 S-Video 2 PAL/SECAM
5 Component / RGBS 1 480i (NTSC)
6 Component / RGBS 1 576i (PAL/SECAM)
7 Component / RGBS 1 480p (NTSC)
8 Component / RGBS 1 576p (PAL/SECAM)
9 Component / RGBS 1 720p (ATSC)
10 Component / RGBS 1 1080i (ATSC)
11 Component / RGBS 2 480i (NTSC)
12 Component / RGBS 2 576i (PAL/SECAM)
13 Component / RGBS 2 480p (NTSC)
14 Component / RGBS 2 576p (PAL/SECAM)
15 Component / RGBS 2 720p (ATSC)
16 Component / RGBS 2 1080i (ATSC)
27 HDMI 1 480i (NTSC)
28 HDMI 1 576i (PAL/SECAM)
29 HDMI 1 480p (NTSC)
30 HDMI 1 576p (PAL/SECAM)
31 HDMI 1 720p (ATSC)
32 HDMI 1 1080i (ATSC)
33 HDMI 1 VGA
34 HDMI 1 SVGA
35 HDMI 1 XGA
37 HDMI 2 480i (NTSC)
38 HDMI 2 576i (PAL/SECAM)
39 HDMI 2 480p (NTSC)
40 HDMI 2 576p (PAL/SECAM)
41 HDMI 2 720p (ATSC)