Owner`s manual

22
Serial Port Rate
The serial port is used by the automation system controllers to control the iScan VP20. The serial port
baud rate defaults to 19200 bps, but can be changed using the Up or Down button.
The supported baud rates are:
• 4800 bps (4.8K)
• 9600 bps (9.6K)
• 14400 bps (14.4K)
• 19200 bps (19.2K)
• 38400 bps (38.4K)
• 57600 bps (57.6K)
Factory Default
The Factory Default option allows you to reset system settings to the factory default.
1- Press either the
Up or Down button. The FPD displays ‘No’.
2- Press the same button to switch to ‘Yes’.
3- Conrm this selection by pressing the Enter button.
The default factory settings are as follows:
• Input Selection : Auto
• Input Aspect Ratio : 4:3 for 480i/p and 576i/p inputs, 16:9 for 720p and 1080i inputs
• Picture Controls : midrange (0)
• Chroma Filter (CUEC) : Auto
• Output Aspect Ratio : (16:9)
• Output Resolution : 480P
• Output Color Space : RGB 4:4:4
• Auto Standby : Off
• Frame Rate
• 60Hz input - 1:1 source-locked output
• 50Hz input - unlocked at 59.94 Hz
• User Mode : Normal
• Video Input Priority Settings :
• 1 – Component 1
• 2 – Component 2
• 3 – S-Video 1
• 4 – S-Video 2
• 5 – Video 1
• 6 – Video 2
• 7 – HDMI 1
• 8 – HDMI 2
• 9 – HDMI 3
• Digital Audio Input Assignment
• Component 1 – Audio 1
• Component 2 – Audio 4
• S -Video 1 – Audio 2
• S -Video 2 – Audio 3
• Video 1 – Analog
• Video 2 – Off
• HDMI 1 – HDMI 1
• HDMI 2 – HDMI 2
• HDMI 3 – HDMI 3