Owner`s manual

Audio Operation

The iScan VP20 features an audio delay function to exactly match the video delay incurred by the

video processing. The iScan VP20 accepts four discrete digital audio inputs, two optical (Audio 1, 2)

and two coaxial (Audio 3 and 4) inputs, one analog audio input and three HDMI audio inputs. The

locations of the audio inputs are shown on the back panel diagrams earlier in this product guide.

The factory default audio assignment is as follows:

Audio 1 (optical): Component 1

Audio 2 (optical): S-Video 1

Audio 3 (coaxial): S-Video 2

Audio 4 (coaxial): Component 2

Stereo (analog): Video 1

NOTE: The HDMI audio inputs can only be assigned to the same HDMI video input although any of the

other audio inputs can be assigned to any of the HDMI video inputs.You can assign a Digital Audio

input to each Video input in the following manner:

You can assign an audio input to each Video input in the following manner:

1. Select a video input on the remote control.

2. Select Audio 1, 2, 3, 4, Stereo, HDMI or Off from the ‘Input Adjust/Audio Input’ menu.

NOTE: If an analog video input is selected, the HDMI option will not be available.