User Guide

Save
Page 49
4: Set Light Show options
You can tell the controller not to use strobing in the automatic light show using this
option. You can also set Enhanced light show mode, where the controller produces
more dramatic effects to add further interest to the light show.
LS Strobe 1:Off 2:On
Enhanced 3:Off 4:On
The default settings are Strobe On, Enhanced mode Off.
If you turn Enhanced mode on, make sure you have set any unused heads to ‘Off’ in
the Light Show group selection (see page 20) or you might get times when everything
goes dark.
5: Set MIDI functions
The controller has comprehensive MIDI control functions. This option lets you set the
basic MIDI parameters and also sets how some of the commands operate.
You can do the following:
1. Set MIDI receive channel
2. MIDI Thru/Out mode
3. MIDI System Exclusive dump
4. MIDI Crossfade mode
5. Output test
The controller displays the options one after the other. Press the number key
corresponding to the option you want to select.
5.1 Receive channel
The receive channel tells the unit which of the 16 MIDI channels to respond to. Press
the number button of the channel you want. If you hold down the ‘1’ button the unit
will be set to ‘omni’ (the unit will respond to messages on any MIDI channel)
MIDI rx chan: 01
Select new channel