User Guide

Cancel
Page 44
10.Cancel
The function of the Cancel button depends on what the controller is doing when you
press it. Most of the time it will abort the last command that you have started, or go
back a step in the procedure you are carrying out. If the controller asks you a “Yes-
No” question on the display, the Cancel button functions as “No”.
This will happen provided you press the button for a short time. If you hold the
button down, there are some special functions as follows.
Output clear
If you hold down Cancel for more than 2 seconds, the controller will clear all the
outputs to zero, deselect all heads and turn off any selected scenes and chases. This is
an ‘all-off’ function which works at any time, no matter what the controller is doing.
Deselect all heads
If you press Cancel briefly while in Head Select mode, then all the heads will be
deselected.
Clear colour or gobo
If you press Cancel briefly while in Colour or Gobo select mode, then the colours or
gobos for the selected heads will be set to zero.
Turn off scene or chase
If you press Cancel while in Scene select or Chase select mode, the current scene or
chase (A or B) will be turned off.
Reset unit to factory defaults
Hold down Cancel while turning on the power to the unit, then release the button
after 1 second.
This will (after checking that you really want to) erase the entire memory, then set all
the options back to how they were when the unit left the factory.