User Guide

Chase
Page 41
The controller asks you which chase you want to copy from. You can select the chase
bank by pressing Bank as usual, and you select the chase number simply by pressing
1-16. The controller then asks you where you want to put the chase you’ve copied.
You can’t copy to the pre-programmed banks 5-8.
4: Copy bank of chases
This option allows you to copy a complete bank of 16 chases to another bank. You
select the bank of chases to copy (1 to 8), and the bank of chases where you want the
copied chases to be stored (1 to 4). Any chases in the bank you are copying to will be
overwritten.
5: Chase run mode
This option lets you tell the controller how you want to run individual chases. The
display shows
Auto/Man A:[1*A 2.M]
Run Mode B:[3*A 4.M]
The options currently selected have a star by them. Press button 1-4:
1/3.Auto - (Default) Press 1 to set Chase A to Auto, 3 to set Chase B to Auto. Chases
run automatically; sound triggered if the Sound button is selected, or timer
triggered if the Sound button is not selected
2/4.Manual - Press 2 to set Chase A to Manual, 4 to set Chase B to Manual. You step
through the chase manually by activating the Control socket (pressing the
footswitch), or by sending a MIDI step command.
6: Chase auto-select mode
This option lets you tell the controller if you want it to automatically select new
chases, and if so, how you want it to choose them. The display shows
Chs Autoselect 1.Off
2*Seq 3.Rand 4*PrePg
The options currently selected have stars by them. Press button 1-4:
1.Off - Turns auto-select off: the controller will only change chase when you select a
new one.
2.Sequence - Runs through all programmed chases in sequence (you can change
manually as well - the sequence will carry on from the one you choose).
3.Random - Selects a new chase at random from the programmed chases.