User Guide

Bank
Page 32
8. Bank
The function of the Bank button varies depending on what the controller is doing
when you press it. If you are saving or recalling Chases, then the button allows you to
change the Chase Bank. If you are saving or recalling Scenes, then it allows you to
change the Scene Bank Otherwise the button will display a warning message and do
nothing.
8.1 Chase bank select
If you press Bank while you are recalling a chase, or while you are selecting a chase
number to save, then you will be asked to select a chase bank. If you are recalling a
chase, you can choose from banks 1 to 8; banks 1-4 are user programmable and banks
5-8 are pre-programmed. If you are saving a chase, you can only choose banks 1-4.
8.2 Scene bank select
If you press Bank at any other time, you will set the Scene Bank. There are 32
possible scenes, but you can only write to the bottom 24.
The first time you press Bank, the unit will say
Select sc bank 1-16
[Bank] for 17-32
If you want to select a bank between 1 and 16, press the number button of the bank.
If you want to select a bank from 17 to 32, press Bank again. The unit will say
Select sc bank 17-32
[Bank] for 1-16
If you are selecting banks 17 to 32, add 16 to the numbers on the buttons. In other
words, if you want bank 17, press 1; for bank 18, press 2; and so on up to bank 32, for
which you press 16.
If you are selecting a scene bank for saving, you will not be able to select banks 25-32
as they are pre-programmed and not user-programmable.