User Guide

Scene
Page 30
Scene Bank Copy
Copy from [1-16]?
Press a number key from 1-16 to select the bank to copy from. You can swap
between banks 1-16 and 17-32 by pressing the Bank button (you can copy a bank of
the pre-programmed scenes to a user-programmable bank if you want to edit them).
The display will change to
Copy from bank 5
Copy to [1-16]?
Press a number key from 1-16 to select the bank to copy to. Again, you can swap
between banks as before. You cannot copy to the pre-programmed banks (25-32).
The controller will copy the bank of scenes.
Note: If you want to copy an individual scene to another scene, simply recall
the scene then save it to the new scene.
4: Scene crossfade mode
This option lets you tell the controller how to change from one scene to the next.
The display shows
Scene xfade mode
1*Off 2.Fix 3.Slider
The option currently selected has a star by it. Press a button from 1 to 3:
1.Off - tells the controller to jump from one scene to the next
2.Fix - lets you set the crossfade time to a fixed value using the Value slider. Set the
crossfade time you want, then press Save to store it. The crossfade time will
be fixed at the value you stored.
3.Slider - lets you change the crossfade time using the Value slider while you are in
Scene Recall mode.
The default setting is Off.
5: Exclude channel mode
This option lets you tell the controller which channels you want to include in the
scene when you save it, and which you want to set to zero. Normally you would save
all the channels, but if you’re saving a scene for a multiple chase (e.g. one chase to
move mirrors combined with another to change colours) you might want some of the
channels automatically set at zero when you save the scene.