Installation & Assembly

3 4

English

Assembly Instructions - Chair Assembly Assembly Instructions - Chair Assembly

1. Place the base upside down on a rm but padded surface.

We recommend placing a piece of foam from the box on the oor.

Firmly insert the 5 castors into

the corresponding holes.

3. Insert the faux bolts

into the holes in the

center hub of the base.

4. Insert the thick

end of the gas lift

into the center

hole of the base

and slide the plastic

cover into place.

5. Remove the 4 M8 bolts that are already installed on each side of the backrest. Then position

the backrest between the hinges that are attached to the seat pan. Reinstall the 4 M8 bolts into

their original holes once the hinges are in place. Be sure to use your ngers to start the bolts and

be careful to ensure they are not cross threaded. Proceed by rmly tightening the bolts with the

allen key provided.

5 X

4 X

M8 bolts

2. Turn the base right

side up and insert the

colour accent chevrons

in the end of each arm

of the base.