User Guide

User Guide Neat Image

20-Nov-03

7.5. Queuing and holding image filtration jobs

An image filtration job in the queue is processed when it is ready (i.e., input image and device noise

profile are present) unless you specifically put it on hold. A job put on hold will not be processed until

you explicitly queue it.

To queue image filtration job(s)

⇒ Select one or more filtration jobs in the list that you want to process and click

(the

Queue selected job button) or select the Job | Queue menu item.

The selected job(s) will receive status ‘queued’ and will be processed when their turn comes.

To put image filtration job(s) on hold

⇒ Select one or more filtration jobs in the queue that you want to put on hold and click

(the Put selected job on hold button) or select the Job | Hold menu item.

The selected job(s) will receive status ‘on hold’ and will not be processed.

7.6. Starting and stopping the filtration queue

You may need to completely stop (and then start again) the filtration queue. This can be done using the

controls in the Filtration Queue box.

To stop the filtration queue

⇒ Click

to stop processing jobs in the filtration queue.

To start the filtration queue

⇒ Click

to start processing jobs in the filtration queue.

7.7. Saving output images

When a job is done in the filtration queue, you most likely will want to save the result. This can be done

within the Filtration Job Editor (you can use the Edit button to open it) or directly from the Filtration

Queue window.

To save output image of a filtration job

⇒ Click

(the Save output image as button).

You can save output images of more than one job using this button. Select several completed jobs

and click this button to save several output images at once.