Instructions

14001 - red
14002 - green
14004 - blue
14005 - red
14003
USB charging cable Charging case Lithium Batteries
Remote Control
(Radio)
RC Car Manual
1. Remove the truck body
1.5V AA 1.5V AA
1.5V AA
PUSH
1.5V AA 1.5V AA
1.5V AA
PUSH
1.5V AA 1.5V AA
1.5V AA
(1) Remove the battery cover on the botton of
the transmitter (figure 1)
(2) Install 3 x 1.5V AA batteries (not included)
in correct polarities (figure 2)
(3) Close the battery cover (figure 3)
NOTICE!
When installing batteries, please be sure to match
the polarities makred on the battery holder.
Do not mix old and new batteries.
Do not mix different type of batteries.
(figure 1) (figure 2) (figure 3)
-6-
2. Install Transmitter Batteries
Pull out the pins and remove the body
Make sure all accessories are properly attached, remove the
protection film from the body before turning on the truck