TRANSMITTER SPECIFICATION / SENDER SPEZIFIKATIONEN Channels: 2 Model type: car/boat RF power: less than 20 dbm Modulation: GFSK Code type: digital Sensitivity: 1024 Low voltage warning:yes (less than 4,5 V) DSC port: yes (3.5 mm) Charger port: yes Power: 6 VDC (1.
BINDING RADIO & RECEIVER / BINDEN ANLAGE & EMPFÄNGER Our products are well matched in the factory, you don‘t need to match by yourself. If you are going to match the receiver with another ransmitter or you have to connect a new receiver or transmitter, please follow the following steps: 1. Install the battery to 2.4 GHz transmitter and shut it down. 2. Insert the matching lines to the channel „BIND“ port of the receiver. 3.
INSTALLATION / VERBINDEN Electric Model / Elektro Modell ESC Nitro / Gas Model / Verbrenner Modell
FAIL SAFE SETUP / EINSTELLUNG FAIL SAFE Fail safe function – digital protection against radio interference. The safety electronic can detect reception of a “false” or incomplete radio signal. E.g. due to a low transmitter battery or environmental radio interference which reach the model, or if the model is out of the transmitter range. For protection against damage, servo switches to the brake position and the model stops. Setup: 1. Turn on the power of transmitter. 2.
ABSIMA GMBH GIBITZENHOFSTRASSE 127A D- 90443 NUERNBERG GERMANY www.absima.
