Installation Guide

PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30372R 19/06/15 Customer Support - 800-305-4436
Absco Regent Shed
Model: J30372R
INSTRUCTIONAL
VIDEOS
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
 The site for the shed must be level.
 It is recommended that the shed be set on a 4in concrete slab and anchored down
appropriately (refer last page for details).
 Before commencing any assembly, read through these instructions in detail to gain a
thorough understanding of assembly methods and associated details.
 Unpack the carton and carefully identify and check off all the parts against the parts
described and illustrated on the following pages.
 Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
 Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
 It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
Masonry 25/64in
Normal 25/64in
OPTIONAL
Normal
No. 30, 11/64in