Installation Guide

ROOF CONSTRUCTION
PAGE 19
Absco Regent Shed
Model: J30372R
INSTRUCTIONAL
VIDEOS

SECURE RIDGE BEAM TO
GABLE SECTIONS WITH
TWO SCREWS AT EACH
END. SECURE EACH ROOF
PANEL WITH ONE SCREW
IN EACH CORNER ONLY
AT THIS STAGE
ROOR OVERHANGS
ALL WALL PANELS

OUTSIDE VIEW
INSIDE VIEW
AFTER ATTACHING BOTH ROOF
PANELS TO WALLS AS SHOWN
ABOVE, FIT ONE REGENT BRACE
TO THE RIDGE BEAM AND FRONT
WALL AS SHOWN. YOU WILL HAVE
TO REMOVE AND REPLACE
EXISTING SCREWS AT FIXING
LOCATIONS. REPEAT THIS
PROCEDURE FOR THE REAR
WALL REGENT BRACE
INSIDE VIEW
13A
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30372R 19/06/15 Customer Support - 800-305-4436