Installation Guide

6. DOOR PANEL ASSEMBLY
PAGE 17
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30372R 19/06/15 Customer Support - 800-305-4436
91A
91A
A
B
Absco Regent Shed
Model: J30372R
INSTRUCTIONAL
VIDEOS
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill holes with No. 30 Drill and secure
with screws
NOTE: 8/32in CSK Nuts and bolts (supplied) will require
enlarging the hinge hole using a 11/64in drill bit
INSERT 91A JAMBS UNDER THE CHANNELS AROUND THE DOOR
USE 4 x 8/32in NYLOC
BOLTS TO SECURE
PADBOLT TO DOOR